SentinelGlow™ Solar Sensor Light

Modern motion-activated lighting for safer outdoor spaces.

SentinelGlow™ provides convenient outdoor illumination without electrical wiring. Its solar panel charges the internal battery during daylight, while three selectable operating modes let you control how the light responds after dark.

KEY BENEFITS

• Solar powered—no electrical wiring required
• PIR motion detection from a stated distance of approximately 3–5 metres
• Three lighting modes for different outdoor needs
• Broad 120° stated lighting range
• 72-COB LED design
• Automatic nighttime operation
• Suitable for exterior walls and other exposed outdoor locations

THREE LIGHTING MODES

• Motion Only: Activates when movement is detected, then turns off approximately 20 seconds after movement stops
• Dim + Motion: Maintains low-level lighting, brightens when movement is detected and returns to dim lighting afterward
• Constant Night Light: Automatically provides steady illumination after dark at a reduced brightness level

Performance and mode behaviour may vary according to charging conditions, placement and product settings.

IDEAL FOR

• Entrances and doorways
• Yards and gardens
• Gates and boundary walls
• Garages and driveways
• Exterior stairs
• Side passages
• Patios and verandas
• Walkways and pathways

HOW IT WORKS

Install SentinelGlow™ in a location where its solar panel can receive direct sunlight. During the day, the panel converts sunlight into energy and charges the built-in battery. After dark, the selected operating mode determines whether the light activates with movement, remains dim between activations or provides steady illumination.

The manufacturer states a charging time of approximately 6–8 hours in suitable sunlight. Actual performance will vary with weather, season, installation position, selected mode and frequency of activation.

PRODUCT DETAILS

• Product type: Solar motion-sensor wall light
• Light source: 72 COB LEDs
• Power source: Solar
• Solar panel: 5.5V, 2.5W
• Battery: 3.7V, 1200mAh rechargeable lithium battery
• Motion sensor: PIR
• Stated detection distance: Approximately 3–5 metres
• Stated lighting range: 120°
• High-light delay: Approximately 20 seconds
• Stated charging time: Approximately 6–8 hours in suitable sunlight
• Material: ABS
• Colour: Black
• Installation type: Wall mounted
• Lighting modes: Three

WHAT’S INCLUDED

• 1 × SentinelGlow™ Solar Sensor Light
• Mounting accessories

INSTALLATION TIPS

• Choose a location that receives direct sunlight during the day.
• Avoid installing beneath roofs, trees or other heavily shaded areas.
• Position the sensor toward the area where movement should be detected.
• Keep the solar panel away from competing nighttime light sources where possible.
• Secure the light firmly before use.
• Allow it to charge completely before evaluating nighttime performance.

CARE INFORMATION

Keep the solar panel clean and free from dust, leaves and debris to support efficient charging. Wipe the light periodically with a soft, damp cloth. Do not immerse the unit or install it where flooding and standing water occur.

PLEASE NOTE

Charging time, brightness, motion detection and operating duration will vary according to sunlight, weather, placement, battery condition and frequency of activation. SentinelGlow™ improves outdoor visibility but is not a replacement for a monitored security or alarm system.

Product Image: